A 30 Metre Air Hose Costs You 3 Bar Before the Tool Sees Any
Your compressor gaug...
Couplings & Hoses
Your Cylinder Sweeps 0.2 Litres. The Compressor Sees 2.7.
A 50 mm bore on a 10...
FRL & Cylinders
The Fitting Has No Label. Your Caliper Is the Label.
A thread gauge canno...
Fittings
Your Gauge Says 1/4 NPT. The Gauge Is Right. The Fitting Isn’t.
A pitch gauge cannot...
Fittings
6 mm Is Not 1/4 Inch. That 0.35 mm Gap Is Why It Leaks.
A 6 mm tube and a 1/...
Fittings
Your “Half-Inch” Fitting Doesn’t Measure Half an Inch
The fitting says 1/2...
Fittings
OSHA 1910.242(b): The 30 PSI Rule and Dead End Pressure
OSHA has one number ...
Air Tools
Air Hose Sizes and Fitting Codes: ID, OD and Metric vs Inch
Half of the fitting ...
Couplings & Hoses
5/2 Way Solenoid Valve on 24V DC: Wiring and Selection
A 5/2 valve is the w...
Valves
Brass Push-In Fittings: When to Use Metal, When Plastic Wins
Plastic push-in fitt...
Fittings
Quick Coupling Interchange Chart: Nitto, US and European Profiles
A quick coupling tha...
Couplings & Hoses
HVAC Duct Cleaning Tools: What Actually Goes in the Kit
Every week someone a...
Air Tools